Upload program use LAN mode
Upload program use LAN mode
10/15/2017
1. First, to disassemble the sign, read here.
http://www.ledclub.net/2017/03/22/instruction-for-disassembling-3914-ledsign/
2. The cable meets the cat5e standard，568B standard.
3. Insert the LAN cable as shown in the picture
Note:
There are 2 LAN ports on the controller,
Can only be inserted in the LAN Near usb port.
4．Plug the other end of the LAN cable into your computer network port
5．Turn off windows firewall
6. Set the ip address of the computer
ip address is 192.168.43.78.
7.Send method of software
my program is not uploading using Udisk or by LAN
have replied to you on ebay.
Thank you! I did this and it works very well.
It not any terminal when i’ll publish the program. What the problem?
please check:
1.windows Firewall needs to be shut down.
2.computer ip need set to 192.168.43.xxx